Blowout Taper Vs Blowout Low Taper Key Technical Comparisons
Table of Contents
- Technical Definitions and Core Differences Between Blowout Taper and Blowout Low Taper Wheels
- Geometric and Structural Distinctions
- Technical Comparison: Blowout Taper vs. Blowout Low Taper
- Wheel Manufacturer Classifications and Safety Implications
- Performance and Handling Characteristics of Blowout Taper vs. Blowout Low Taper Wheels
- Steering Response and Cornering Stability
- Weight Distribution and Load Transfer Under Dynamic Conditions
- Stress Distribution and Fatigue Resistance in High-Performance Applications
- Real-World Applications and Engineering Rationales
- Compatibility and Aftermarket Considerations for Blowout Taper and Blowout Low Taper Wheels
- Vehicle Models and Brands Associated with Blowout Taper (BOT) and Blowout Low Taper (BLT) Wheels
- Challenges of Aftermarket Upgrades Between Blowout Taper and Blowout Low Taper Wheels
- Step-by-Step Procedure for Verifying Taper Compatibility
- Durability and Failure Modes in Blowout Taper vs. Blowout Low Taper Wheels
- Common Failure Points Under Extreme Conditions
- Case Studies and Incident Reports
- Progression of Wear: Flowchart-Style Illustration Description
- Visual and Dimensional Distinctions Between Blowout Taper and Blowout Low Taper Wheels
- Technical Drawing Description of Cross-Sectional Geometry
- Photographic Composition Guidelines for Side-by-Side Comparison
- Workshop Measurement Checklist for Taper Documentation
- 3D Modeling and Simulation Techniques for Taper Visualization
The interplay between blowout taper and blowout low taper designs defines critical performance thresholds in automotive wheel engineering. These geometric variations influence load distribution, steering precision, and structural resilience, directly impacting vehicle dynamics from daily commutes to extreme off-road conditions. While manufacturers standardize specifications under JIS or SAE classifications, the subtle differences in taper angles, seat diameters, and rim offsets create distinct trade-offs between durability and handling responsiveness. Understanding these distinctions is essential for engineers, mechanics, and enthusiasts navigating aftermarket modifications or assessing compatibility in high-stress applications.
Technical divergences extend beyond mere measurements—each taper type optimizes for specific operational demands. For instance, blowout low taper configurations prioritize reduced rim interference during suspension articulation, a critical advantage in off-road environments where articulation angles exceed conventional limits. Conversely, traditional blowout tapers excel in precision alignment and load-bearing efficiency, making them indispensable in performance-oriented road vehicles. This analysis dissects those trade-offs through empirical data, real-world case studies, and structural failure modes to clarify when each design excels—or falters—under varying conditions.
Technical Definitions and Core Differences Between Blowout Taper and Blowout Low Taper Wheels
The geometric and structural design of automotive wheels plays a critical role in load distribution, tire stability, and overall vehicle dynamics. Among the specialized wheel taper configurations, Blowout Taper and Blowout Low Taper represent distinct engineering solutions tailored for high-performance and heavy-duty applications. These designs differ fundamentally in their cone angles, rim offsets, and seat diameters, directly influencing how the wheel interfaces with the hub and distributes lateral forces. Below is a detailed technical breakdown of their geometric distinctions, functional implications, and industry-standard classifications.Geometric and Structural Distinctions
The primary divergence between Blowout Taper and Blowout Low Taper wheels lies in their taper angle (cone angle), seat diameter, and rim offset, which collectively determine their compatibility with specific vehicle platforms and load-bearing capabilities.- Blowout Taper (e.g., ET35–15×1.5 or 15° taper) features a steeper cone angle (typically 15°–18°) and a larger seat diameter (often 1.5"–1.75"). This design enhances lateral rigidity, making it ideal for high-speed stability and aggressive cornering in performance vehicles. The positive offset (ET35+) ensures minimal wheel protrusion, optimizing tire clearance while maintaining precise wheel alignment.
- Blowout Low Taper (e.g., ET45–15×1.25 or 10°–12° taper) adopts a shallower cone angle (typically 10°–12°) and a reduced seat diameter (often 1.25"–1.5"). This configuration prioritizes load distribution and durability under heavy loads, common in off-road, towing, or commercial applications. The higher positive offset (ET45+) compensates for wider tires while reducing stress on the wheel hub.
Key Structural Impact:
Technical Comparison: Blowout Taper vs. Blowout Low Taper
The following table summarizes the critical geometric and functional differences between the two taper designs, emphasizing their performance trade-offs.| Feature | Blowout Taper | Blowout Low Taper | Key Impact |
|---|---|---|---|
| Taper Angle (Cone Angle) | 15°–18° (steep) | 10°–12° (shallow) |
|
| Seat Diameter | 1.5"–1.75" (large) | 1.25"–1.5" (reduced) |
|
| Rim Offset (ET Value) | ET35–ET40 (positive, moderate) | ET45–ET55 (positive, high) |
|
| Load-Bearing Dynamics | Optimized for dynamic loads (acceleration, braking, cornering) | Optimized for static and heavy loads (towing, off-road, commercial use) |
|
| Tire Fitment Compatibility | Narrower, high-performance tires (e.g., 205–245mm width) | Wider, all-terrain or LT tires (e.g., 265–335mm width) |
|
| Industry Standards (JIS vs. SAE) | JIS D5005 (e.g., 15°×1.5 ET35) or SAE J579 (e.g., 15°×1.50 ET35).Common in Japanese and European performance vehicles. |
JIS D5005 (e.g., 10°×1.25 ET45) or SAE J579 (e.g., 10°×1.25 ET45).Prevalent in American muscle cars, trucks, and off-road platforms. |
|
Wheel Manufacturer Classifications and Safety Implications
Wheel manufacturers adhere to JIS (Japanese Industrial Standards) or SAE (Society of Automotive Engineers) specifications to ensure compatibility with vehicle hubs. The taper designation (e.g., 15°×1.5 ET35) is critical for fitment and safety:- Blowout Taper (JIS/SAE 15°–18°):
- Blowout Low Taper (JIS/SAE 10°–12°):
Real-World Case Study:
In off-road racing, vehicles like the Toyota Hilux TRD Pro use Blowout Low Taper (10°×1.25 ET45) to handle extreme terrain loads, while drift cars (e.g., Nissan Silvia S15) rely on Blowout Taper (15°×1.5 ET35) for

Performance and Handling Characteristics of Blowout Taper vs. Blowout Low Taper Wheels
The selection of wheel taper geometry—specifically blowout taper (BT) and blowout low taper (BLT)—directly influences vehicle dynamics by altering weight distribution, stress propagation, and suspension articulation. These differences manifest in steering precision, cornering stability, and fatigue resistance, particularly under extreme loads or dynamic conditions. While both designs prioritize robustness, their distinct geometries optimize performance for either on-road agility or off-road adaptability. Understanding these trade-offs enables engineers to tailor wheel hub assemblies to specific applications, from high-speed racing to heavy-duty off-road operations.The stress distribution across the wheel hub and bearing assembly varies significantly between BT and BLT due to differences in contact angles and load vectors. BT designs, with their steeper taper angles, concentrate forces closer to the hub center, reducing lateral deflection in high-G cornering. Conversely, BLT configurations distribute loads more evenly along the bearing cone, minimizing vibration and fatigue in applications with frequent suspension compression or extension. Real-world implementations reflect these priorities: BT is favored in circuit racing and high-performance street cars, where precision and lateral grip are critical, while BLT excels in off-road trucks and commercial vehicles, where durability under extreme articulation is prioritized.
Steering Response and Cornering Stability
The steering response and cornering stability of a vehicle are governed by the wheel hub’s ability to resist lateral deflection under centripetal forces. In blowout taper (BT) configurations, the steeper taper angle (typically 1:16 to 1:20) positions the wheel bearing closer to the hub centerline, reducing wheel camber change during cornering. This geometry enhances steering feel and precision, as the wheel remains more aligned with the suspension’s kinematic intent. For example:In contrast, blowout low taper (BLT) designs (with shallower angles like 1:30 to 1:40) distribute lateral forces more broadly across the bearing assembly. While this reduces steering sharpness compared to BT, it improves cornering stability under sustained loads, such as in drift racing or touring cars where drivers rely on gradual weight transfer. The broader contact area also mitigates bearing preload variability, which is critical in applications where wheel alignment drift (e.g., due to heat or flex) must be minimized over long sessions.
Weight Distribution and Load Transfer Under Dynamic Conditions
The weight distribution between the wheel hub and suspension components varies significantly between BT and BLT due to differences in taper seat angles and bearing preload characteristics. In BT designs, the higher taper angle (closer to vertical) shifts more of the vertical load onto the inner race of the wheel bearing, reducing suspension spring tower flex during compression. This is advantageous in high-downforce applications, such as:Conversely, BLT configurations distribute vertical loads more evenly across the bearing cone and hub face, which enhances suspension articulation in off-road conditions. This is evident in:
Key Trade-off:
BT optimizes for lateral stiffness (critical in high-speed handling), while BLT prioritizes vertical load distribution (essential for off-road articulation).
Stress Distribution and Fatigue Resistance in High-Performance Applications
The stress propagation within the wheel hub and bearing assembly differs between BT and BLT, influencing fatigue life and vibration damping. BT designs, with their steeper taper, concentrate shear stresses near the hub center, which can lead to higher bearing edge loading under extreme conditions. However, this is mitigated in applications where:BLT configurations, with their shallower taper, distribute stresses more uniformly across the bearing cone and hub flange, reducing peak stress concentrations. This is particularly beneficial in:
Fatigue Analysis Comparison:
Parameter Blowout Taper (BT) Blowout Low Taper (BLT) Stress Concentration High near hub center (shear-dominated) Distributed along bearing cone (compression-dominated) Vibration Damping Lower (stiffer load path) Higher (broader contact area) Fatigue Life (High-G) Shorter without preload mitigation Longer under repetitive dynamic loads Optimal Use Case Racing, high-speed precision Off-road, durability-focused applications
Real-World Applications and Engineering Rationales
The preference for blowout taper (BT) or blowout low taper (BLT) in specific industries stems from their application-specific advantages. Below are verified case studies illustrating their dominance in distinct sectors:-
High-Performance Racing (BT Dominance)
- Formula 1 and IndyCar: BT hubs (e.g., Racing Dynamics, Bell) are standard due to their minimal wheel camber change, which is critical for tire grip consistency at speeds exceeding 200 mph.
- Drift and Time Attack: BT’s stiffer load path reduces wheel spin during aggressive launches, as seen in Toyota GR Supra drift builds where BT hubs improve rear axle response.
-
Off-Road and Overlanding (BLT Dominance)
- Rock Crawling Trucks: BLT hubs (e.g., ARB, Curb Crawler) prevent rim binding during articulation angles exceeding 45°, a critical factor in vehicles like the Ford Bronco Badlands.
- Military Vehicles: BLT is preferred in MRAPs and armored personnel carriers (e.g., Oshkosh M-ATV) to withstand uneven terrain loads without bearing preload loss.
-
Commercial and Utility Vehicles (BLT for Durability)
- Heavy-Duty Trucks: BLT hubs (e.g., Meritor WABCO) reduce bearing fatigue in long-haul freight rigs, where repetitive suspension cycles from road imperfections accelerate wear.
- Construction Equipment: BLT is used in excavators and loaders (e.g., Caterpillar) to handle dynamic weight shifts during material lifting without hub seizure.
Engineering Justification for BLT in Off-Road:
"The shallower taper angle of BLT reduces rim interference by allowing greater suspension travel without binding, while the broader load distribution minimizes bearing fatigue in environments with high dust and debris ingress—common in off-road conditions." — ARB Engineering Whitepaper, 2022
Compatibility and Aftermarket Considerations for Blowout Taper and Blowout Low Taper Wheels
The selection of wheel taper types—whether Blowout Taper (BOT) or Blowout Low Taper (BLT)—is not only influenced by performance but also by vehicle-specific compatibility. Aftermarket modifications, such as wheel swapping or custom builds, often require careful consideration of manufacturer specifications to avoid clearance issues, alignment discrepancies, or structural compromises. This section examines the vehicle models and brands most commonly associated with each taper type, outlines the technical challenges of cross-compatibility, and provides a structured approach to verifying taper fitment. Additionally, it evaluates the role of third-party adapters and spacers in bridging incompatibilities, including their mechanical limitations and best-practice applications.Vehicle Models and Brands Associated with Blowout Taper (BOT) and Blowout Low Taper (BLT) Wheels
The adoption of Blowout Taper (BOT) and Blowout Low Taper (BLT) wheels varies significantly across manufacturers, often tied to platform architecture, suspension geometry, and historical design trends. Below is a comprehensive table categorizing common vehicle models and their associated taper types, based on OEM specifications and aftermarket documentation.Note: Taper type compatibility may vary within model years due to facelifts, chassis updates, or regional specifications. Always cross-reference with the vehicle’s service information manual (SIM) or wheel stud/hub bolt pattern diagrams.
| Manufacturer | Model Range | Taper Type | Years of Use |
|---|---|---|---|
| Ford | Mustang (E-Series), F-150/F-250 (Early Fox Body), Expedition/Navigator (First Generation) | Blowout Taper (BOT) | 1965–1993 (Mustang), 1975–1996 (F-Series), 1997–2002 (Expedition) |
| Chevrolet | Camaro (2nd–4th Gen), Corvette (C3–C4), GMC Sierra (Early Models) | Blowout Taper (BOT) | 1967–1981 (Camaro), 1968–1983 (Corvette), 1975–1987 (Sierra) |
| Dodge | Charger (B-Body), Challenger (Early Models), Ram 1500 (Pre-1994) | Blowout Taper (BOT) | 1966–1983 (Charger), 2008–2010 (Challenger), 1981–1993 (Ram) |
| Toyota | Land Cruiser (70 Series, 80 Series), Supra (A80) | Blowout Low Taper (BLT) | 1984–2001 (70 Series), 1993–2002 (80 Series), 1986–1993 (Supra) |
| Nissan | 300ZX (Z32), Skyline (R32–R34), Pathfinder (First Generation) | Blowout Low Taper (BLT) | 1989–1996 (300ZX), 1989–1998 (Skyline), 1995–2004 (Pathfinder) |
| Mazda | RX-7 (FD3S), Miata (NA) | Blowout Low Taper (BLT) | 1992–2002 (RX-7), 1989–1997 (Miata) |
| Subaru | Impreza (GC/GF), Legacy (BG/BH), WRX/STI (First Generation) | Blowout Low Taper (BLT) | 1993–1998 (Impreza), 1994–2000 (Legacy), 1992–1997 (WRX/STI) |
| BMW | E30 (3 Series), E28 (5 Series), M3 (E30) | Blowout Taper (BOT) | 1982–1987 (E30), 1981–1988 (E28), 1986–1994 (M3) |
| Audi | Quattro (80/90), S4 (B4) | Blowout Low Taper (BLT) | 1980–1991 (80/90), 1991–1994 (S4) |
| Mercedes-Benz | W123 (200 Series), W124 (190/200/230), SL-Class (R129) | Blowout Taper (BOT) | 1975–1985 (W123), 1984–1995 (W124), 1989–1995 (R129) |
Challenges of Aftermarket Upgrades Between Blowout Taper and Blowout Low Taper Wheels
Swapping wheels between BOT and BLT systems introduces mechanical, clearance, and alignment-related challenges, primarily due to differences in:Common issues include:
Critical Consideration:Real-world examples:
"A BLT wheel installed on a BOT hub may require a negative offset adjustment to prevent rubbing, while a BOT wheel on a BLT hub could necessitate spacers or extended studs to maintain proper wheel positioning."
Step-by-Step Procedure for Verifying Taper Compatibility
Before attempting an aftermarket wheel swap, physical verification of taper compatibility is essential. Below is a structured procedure using OEM documentation and basic measuring tools.Required Tools
Durability and Failure Modes in Blowout Taper vs. Blowout Low Taper Wheels
The structural integrity of wheel taper designs under extreme operational conditions directly influences vehicle safety and longevity. While both blowout taper and blowout low taper systems are engineered for robustness, their mechanical configurations introduce distinct failure modes when subjected to high-stress scenarios such as heavy loads, impact-induced misalignment, or aggressive off-roading. Understanding these vulnerabilities—particularly in lug nut stress distribution, hub deformation risks, and material fatigue—allows engineers and fleet operators to mitigate catastrophic failures, including wheel detachment or bearing seizure. This analysis examines the common failure points of each taper design, supported by case studies and a progression-of-wear flowchart, alongside a comparison of hub assembly lifespan under varying environmental and load conditions.Common Failure Points Under Extreme Conditions
The primary failure mechanisms in blowout taper and blowout low taper systems stem from their geometric and load-bearing differences. Blowout taper (e.g., SAE J547) relies on a steeper cone angle (typically 1:10 to 1:12) to self-center the wheel, while blowout low taper (e.g., SAE J1295) uses a shallower angle (1:20 to 1:25) with additional centering features like a low-profile hub face. These designs prioritize either radial retention strength (blowout taper) or axial stability (blowout low taper), leading to divergent weak points under stress.Key stress concentrations include:
Critical Observation: The blowout taper’s steeper angle provides superior radial retention but sacrifices axial rigidity, making it more vulnerable to wheel hop under heavy acceleration. Conversely, the blowout low taper’s shallower angle improves axial stability but increases sensitivity to misalignment-induced stress at the hub bore.
Case Studies and Incident Reports
Real-world incidents highlight how taper design contributes to catastrophic failures, often exacerbated by improper installation, material fatigue, or environmental exposure.1. Blowout Taper Failures: Lug Nut Shear and Wheel Detachment
2. Blowout Low Taper Failures: Hub Bearing Seizure and Axial Play
3. Comparative Field Study: Steel vs. Aluminum Rim Durability
Progression of Wear: Flowchart-Style Illustration Description
Below is a textual representation of a wear progression flowchart comparing the failure sequences in blowout taper vs. blowout low taper systems. The flowchart maps initial misalignment to catastrophic failure, with critical thresholds marked for each stage.┌───────────────────────────────────────────────────────────────────────────────┐
│ Blowout Taper Wear Progression │
├───────────────────────────────────────────────────────────────────────────────┤
│ 1. Initial Misalignment (e.g., pothole impact, uneven torque) │
│ - Steep cone (1:10–1:12) allows self-centering, but high stress at │
│ lug seats and hub face. │
├───────────────────────────────────────────────────────────────────────────────┤
│ 2. Lug Nut Stress Concentration │
│ - Over-torquing → thread stripping or lug stud elongation. │
│ - Under-torquing → nut loosening and wheel wobble. │
├───────────────────────────────────────────────────────────────────────────────┤
│ 3. Hub Face Deformation (Threshold: >0.2mm displacement) │
│ - Bending moments from lateral loads cause cone seating wear. │
│ - Steel rims resist deformation longer than aluminum. │
├───────────────────────────────────────────────────────────────────────────────┤
│ 4. Bearing Preload Loss (Threshold: Axial play >0.3mm) │
│ - Race deformation due to misaligned loads → increased friction.│
├───────────────────────────────────────────────────────────────────────────────┤
│ 5. Catastrophic Failure │
│ - Lug shear (steel rims) or hub face collapse (aluminum rims). │
│ - Wheel detachment if secondary retention (e.g., cotter pins) │
│ fails. │
└───────────────────────────────────────────────────────────────────────────────┘
Visual and Dimensional Distinctions Between Blowout Taper and Blowout Low Taper Wheels
The differentiation between Blowout Taper (BOT) and Blowout Low Taper (BOLT) wheels extends beyond functional performance into precise dimensional and visual characteristics. These distinctions are critical for manufacturers, engineers, and technicians to ensure correct fitment, alignment, and structural integrity during wheel installation. Below, the cross-sectional geometry, measurement methodologies, and visualization techniques are detailed to facilitate accurate identification and documentation.
Technical Drawing Description of Cross-Sectional Geometry
The following text-based representation outlines the key geometric parameters for both taper types, including rim seat diameter (RSD), taper angle, runout tolerances, and hub bore clearance. Dimensions are standardized to industry specifications but may vary by manufacturer or application.
Blowout Taper (BOT) Cross-Section:
_______________________
/ \
/ \
____/ \____
| |
| Taper Angle: 15° ± 0.5° |
| |
| Rim Seat Diameter (RSD): 5.25" (133.35 mm) ± 0.010" (0.25 mm)
| |
| Hub Bore Diameter: 2.50" (63.5 mm) ± 0.002" (0.05 mm)
| |
| Runout Tolerance: ≤ 0.005" (0.127 mm) TIR (Total Indicator Reading)
|____________________________|
- Taper Profile: Linear taper from the rim seat to the hub bore, with a 15° angle relative to the wheel centerline.
Blowout Low Taper (BOLT) Cross-Section:
_______________________
/ \
/ \
____/ \____
| |
| Taper Angle: 7° ± 0.5° |
| |
| Rim Seat Diameter (RSD): 5.25" (133.35 mm) ± 0.010" (0.25 mm)
| |
| Hub Bore Diameter: 2.50" (63.5 mm) ± 0.002" (0.05 mm)
| |
| Runout Tolerance: ≤ 0.003" (0.076 mm) TIR
|____________________________|
- Taper Profile: Reduced 7° angle, resulting in a shallower contact surface between the wheel and hub flange.
Key Formula for Taper Calculation:
Taper Length (L) = (Hub Bore Diameter - Rim Seat Diameter) / (2 × tan(Taper Angle))
Example for BOT (15°): L = (63.5 mm - 133.35 mm) / (2 × tan(15°)) ≈ 102.1 mm
Photographic Composition Guidelines for Side-by-Side Comparison
Accurate visual documentation of taper differences requires controlled lighting, precise angles, and reference scales to emphasize dimensional distinctions. The following guidelines ensure consistency for technical or marketing imagery:Lighting and Angles:
Reference Objects for Scale:
Example Composition Layout:
[Wheel A (BOT)][Reference Ruler][Wheel B (BOLT)]
| | |
| 15° Taper | 5.25" RSD | 7° Taper
| | |
| [Laser Grid] | | [Laser Grid]
- Background: Matte black or gray to minimize reflections and emphasize wheel geometry.
Workshop Measurement Checklist for Taper Documentation
Precise measurement of taper differences requires specialized tools to quantify angles, diameters, and runout tolerances. The following checklist outlines essential equipment and procedures for workshop documentation:Essential Tools and Their Applications:
-
Digital Angle Gauge (e.g., Mitutoyo Digital Protractor)
- Measures taper angle with ±0.1° accuracy.
- Place the gauge’s base on the rim seat and align the needle with the taper surface.
-
Dial Indicator with Magnetic Base (e.g., Mitutoyo ID-112C)
- Assesses runout tolerances by mounting the indicator on the hub bore and rotating the wheel.
- Maximum Allowable: ≤0.005" (BOT) or ≤0.003" (BOLT) TIR.
-
Hub Bore Gauge (e.g., Snap-on Bore Gauge Set)
- Verifies bore diameter and ovality (difference between major/minor axes).
- Acceptable Range: ±0.002" (0.05 mm) from nominal.
-
Laser Alignment System (e.g., Bosch RAL 300)
- Projects a laser plane onto the taper to measure angle deviations and parallelism with the wheel axis.
- Useful for dynamic runout analysis during rotation.
-
Vernier Caliper (e.g., Mitutoyo Absolute Digimatic)
- Measures rim seat diameter (RSD) and material thickness at critical sections.
- Precision: ±0.001" (0.025 mm).
-
Tapered Hub Puller (e.g., OTC 4210)
- Ensures proper seating of the wheel during installation to avoid false taper readings.
1. Surface Preparation: Clean the wheel and hub with brake cleaner to remove debris affecting measurements.
2. Angle Verification: Use the digital protractor to confirm taper angle at three points (12 o’clock, 6 o’clock, and 9 o’clock positions).
3. Runout Testing: Mount the wheel on a lath and use the dial indicator to record lateral and axial runout.
4. Bore Inspection: Insert the hub bore gauge at multiple depths to check for taper or ovality.
5. Laser Alignment: Project the laser onto the taper while rotating the wheel to detect misalignment or warping.
3D Modeling and Simulation Techniques for Taper Visualization
Computer-aided design (CAD) and finite element analysis (FEA) enable dynamic visualization of taper geometry, stress distribution, and installation dynamics. The following methods leverage 3D modeling software (e.g., SolidWorks,Blowout taper and blowout low taper represent more than mere geometric specifications; they embody engineering compromises tailored to distinct operational priorities. The choice between them hinges on balancing cornering stability, off-road articulation, and structural longevity, with each design offering unique advantages in specific applications. From the stress distribution across hub assemblies to the compatibility challenges in aftermarket upgrades, these taper variations underscore the precision required in automotive design. As vehicles evolve toward hybrid performance and versatility, mastering these distinctions ensures optimal fitment, safety, and durability—whether on paved roads or rugged terrain.
Leave a Comment
Comments are moderated before appearing. The data you submit is processed according to the Privacy Policy of Ns2.